| Digital thermal imaging camera | |
| Model | One Pro IOS |
| Dimensions | 6 × 2 × 1 cm |
| Weight | 50 gr |
| Measurement range | -20 to 400°C |
| Application | To measure the temperature contour, surfaces, machines and equipment in the temperature range of -23 to 400°C |
| Yoke MT | |
| Model | MT Yoke AC-DC Y-8 |
| Voltage | 220 V AC |
| Frequency | 50 Hz |
| Current | 1.5 Amps @ 230 Volts |
| Lifting AC | 10 pounds (4.5 kg) |
| Lifting DC | 40 pounds (18 kg) |
| Pole Spacing | 1 – 12” (25 – 300mm) |
| Weight | 3 kg |
| Application | PT, MT and Yoke AC&DC test equipment and NDT spray set equipment |
| Video Broscope | |
| Model | GM66A |
| Dimensions | 6*7*23 cm |
| Weight | 350 gr |
| Operating operating temperature | 55 C° |
| Application | Internal imaging of equipment and machinery up to two meters long internally |
| Laser meter | |
| Model | RH-9180 |
| Dimensions | 3.1*4.8*11.6 cm |
| Weight | 105 gr |
| Laser type | 365 nn،> 1mw |
| Measurement range | 0.05 to 80 m |
| Accuracy | 1.5 ± mm |
| Application | For accurate measurement of long lengths |
| Laser Pointer | |
| Model | L-450 |
| Dimensions | 4*12*20 cm |
| Weight | 433 gr |
| Application | For laser pointing at measuring points |
| Paint and coating thickness gauge | |
| Model | WT2110 |
| Dimensions | 7 × 4 × 3 cm |
| Weight | 130 gr |
| Measurement range | 0 تا 1500 Micron |
| Accuracy | 0.1 Micron |
| Application | Size of paint thicknesses and surface engineering coatings in the range (0.01 microns) |
| Ultrasonic thickness gauge | |
| Model | WT100A |
| Dimensions | 7 × 14.5 × 2.8 cm |
| Weight | 130 gr |
| type | Coating thickness gauge |
| Measurement range | 1 ~ 220 mm |
| Accuracy | 0.1 mm |
| Application | Measuring body thickness and levels of machinery and equipment and determining WT fatigue and corrosion life |
| Rubber hardness tester | |
| Model | shore A |
| Dimensions | 2*5*9 cm |
| Weight | 150 gr |
| Measurement range | 0-100HA |
| Accuracy | 0.1 |
| Application | Measure the hardness of rubber and plastic in medium, minimum and maximum values |
| Portable metal hardness testerPortable metal hardness tester | |
| Model | Hartip 2000 |
| Dimensions | 30 × 67 × 124 mm |
| Weight | 240 gr |
| Accuracy | ±0.3 Percent |
| Application | This device can calculate the hardness of large and heavy metal parts and pressurized tanks with very high accuracy. |
| digital scale | |
| Model | AWS-100-SIL |
| Dimensions | 2.8*14.7*14.7 cm |
| Weight | gr |
| Accuracy | 0/001 |
| Application | Measurement of masses up to one kilogram with an accuracy of 0.001 grams |
| Laser level | |
| Model | GLL 3-15 X |
| Dimensions | 12 × 8 × 13 cm |
| Weight | 0.25 kg |
| Laser type | Class 2 |
| range | 15 m |
| Accuracy | 0.2 mm in mm mm |
| Ability to display | Line, point |
| Number of laser lines | 3 lines |
| Application | For leveling static and rotary equipment and machines in industries |
| Lutron optical and mechanical tachometer | |
| Model | LUTRON DT-2230 |
| Dimensions | 19.5 × 6.1 × 3.9 cm |
| Weight | 280 gr |
| Measurement range | Optical capture: 5 to 100,000 rpm
Mechanical: 0.5 to 19999 rpm |
| Accuracy | 0.1RPM in 0 – 1000 RPM |
| Application | Laser and mechanical equipment speed measurement from 0.5 rpm to 20,000 rpm |
